Go for the best power backup line interactive UPS system to power your sensitive equipment and provide maximum protection for your devices. With the APC Smart-UPS C 1500VA LCD UPS, you get smart features that deliver high backup performance, AVR power stabilisation, powerful power conditioning with protection of equipment from spikes, surges, lightning and other power disturbances, battery protection and easy management.

APC Smart-UPS C 1500VA LCD SMC1500I, with output power capacity of 900 watts/1500VA, is suited for servers and other sensitive electronic appliances. Here are its specifications:

Specifications of APC Smart-UPS C 1500VA SMC1500I

Output

• Output Power Capacity: 900 Watts/ 1500 VA
• Max Configurable Power:  900 Watts/ 1500 VA
• Nominal Output Voltage: 230V
• Output Voltage Distortion: Less than 5% at full load
• Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
• Topology: Line Interactive
• Waveform: True Sine wave
• Output Connections: (8) IEC 320 C13 (2) IEC Jumpers    

Input

• Nominal Input Voltage: 230V
• Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14    
• Input voltage range for main operations: 180 - 287V
• Input voltage adjustable range for mains operation: 170 - 300V

Batteries & Runtime

• Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3 hour(s)
• Replacement Battery: RBC6
• RBC™ Quantity: 1
• Runtime Graph: See above

Energy Use/Efficiency

• Load    Efficiency
• 25%    95.2%
• 50%    97.1%
• 75%    97.6%
• 100%    97.7%

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Emergency Power Off (EPO) --

Surge Protection and Filtering

• Surge energy rating 459 Joules
• Filtering Full time; multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Key Features OF APC Smart-UPS C 1500VA LCD 230V

1. High online efficiency  Reduces utlility costs, generates less heat.
2. Green mode  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
3. Pure sine wave output on battery  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
4. LCD Status Display  Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
5. Cold-start capable  Provides temporary battery power when the utility power is out.
6. Temperature-compensated battery charging  Prolongs battery life by regulating the charge voltage according to battery temperature.

Smart-UPS Features & Benefits

Availability

1. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
2. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
3. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
4. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
5. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
6. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
7. Disconnected battery notification Warns when a battery is not available to provide backup power.

Manageability

1. Network manageable Provides remote power management of the UPS over the network.
2. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
3. LED status indicators Quickly understand unit and power status with visual indicators.
4. Serial connectivity Provides management of the UPS via a serial port.
5. USB connectivity Provides management of the UPS via a USB port (not available on all models).
6. Disconnected battery notification Warns when a battery is not available to provide backup power.

Serviceability

1. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
2. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
3. Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
4. Resettable circuit breakers Enables a quick recovery from overload events.
5. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

1. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
2. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.