Eaton 9E 10kVA/8kW Online Tower UPS HW (9E10KI)


Add to cart

Eaton 9E 10KVA/8kW Online Tower UPS (9E10KI)

  • Online double conversion topology
  • Intuitive LCD panel display - get clear information about UPS status
  • More power (watts) to protect more equipment due to 0.8 power factor
  • Internal bypass & maintenance bypass as standard
  • XL models with internal supercharger for extra-long runtime
  • Communication via USB, RS232 serial or over the network
  • Input voltage range without using batteries: 176-276V
  • Efficiency: Up to 93% in Online mode, 97% in ECO mode
  • Overload capacity: 105%-110%: 5min, 110%-130%: 1min, 130%-150%: 10s
  • Slot for Network-MS, ModBusMS or Relay-MS cards
  • External battery module terminal block
  • Intelligent Power Software
  • Casters

More details

Eaton 9E 10KVA/8kW Online Tower UPS (9E10KI)

Eaton is a global brand with a tradition of innovation and quality. Eaton UPS is a frontline brand that can be trusted for top-level performance and suitable for critical applications. The 10kVA (8kW-rated) Eaton 9E Online UPS (9E10KI) is one of the top choices for online UPS of 10kVA capacity.

Eaton 9E 10KVA/8kW Online UPS Offers Reliability and performance

  • The Eaton 9E constantly monitors power conditions and regulates voltage and frequency due to the online double conversion topology
  • With Eaton 9E 10KVA / 8kW Online UPS, you get to power more servers than with most similar UPSs due to a 0.8 power factor
  • With Eaton, you’re trusting a leading manufacturer with decades of experience and high quality standards: CE compliance certified by external agency (CB report from the TUV)

Eaton’s Manageability Advantage

  • Get clear information on the UPS’ status and measurements (load level, battery level, input/output voltage and frequency) on a single screen with the new LCD interface
  • Easily communicate with the UPS through USB, RS232 serial or over the network with the optional network card (Network-MS). Relay cards or ModBus cards are also available.
  • Integrate 9E into all software environments. The Eaton 9E is delivered with Eaton’s Intelligent Power™ Software and is compatible with all major OS including advanced integration in VMware vCenter and Microsoft Hyper-V.

Get Eaton Flexibility

  • The internal bypass allows service continuity in case of an internal fault. A maintenance bypass is also available as standard for easy maintenance of the UPS without powering down critical systems.
  • Make your installation more flexible with a combo input (3:1 and 1:1) on the 10kVA, 15kVA, and 20kVA
  • Extend runtime as you like by adding up to 4 external battery modules (EBM). For extra-long runtime, XL models with internal supercharger are also available at 10kVA and 20kVA.

Specifications of Eaton 9E 10KVA/8kW Online UPS

TopologyOnline double conversion
Part Number9E10Ki
Rating (VA/Watts)10000/8000
Dimensions (H x W x D, mm)708.5 x 262.4 x 612.9
Weight (kg)85.4
Warranty1 year
Electrical Input
Hardwired - see manual for terminal block layout
Input Voltage Range176-276V without derating (up to 110-276V with derating)
Nominal Voltage220/230/240V
Frequency50/60 Hz autoselection
Frequency Range45-66 Hz
Short Circuit Current137 A
Electrical Output
Voltages220V/230V/240V ±2 %
Voltage THD<3%
Hardwired - see manual for terminal block layout
Overload Capacity105%-110% : 5min, 110%-130% : 1min, 130%-150% : 10s, >150% : 100ms
Efficiency (Normal Mode)Up to 93% in Online mode, 97% in ECO mode
Output Frequency50/60 Hz autoselect, frequency converter as standard
Communication Ports1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously)
Communications Slot1 slot for Network-MS, ModBus-MS or Relay-MS cards
Power Management SoftwareIntelligent Power Software
Environmental & Standards
Audible Noise<55dB
Operating Temperature0 to 40°C
Safety markingsIEC/EN 62040-1
EMC MarkingsIEC/EN 62040 -2
ApprovalsCE, CB report (TUV)

7 other products in the same category:


No products

Shipping: ₦0
Tax ₦0
Total: ₦0

Cart Check out


Blog Archive

Recent Articles